m2c3050 ARRMA MOTOR MOUNT

Made using 6061-t6 aluminum and anodized black. this is a time tested designed to give you maximum regidity. 

The mount is designed to use the Arrma center diff cover. The pinion gear range is from 12 to 23 tooth.

This is a quick change model and is designed to use the  the stock gear cover and roll cage. 

You simply remove the (4) roll cage screws (provided 3 x25mm sock head cap screws) and you can access the diff. 

We use a (2) 4 mm x10 button head screws  to lock the slide in place. the (3) mm screw locks the slide to the bottom to take out any play in the slide.

the top blocks are made using delrin material and accept the roll cage.

Please be aware the the top block that holds the diff in place are made using delrin. After a lot of research we found that the delrin was superior to

aliuminum 

there are (2) 4x12mm flat head screws to secure the motor to the slide.(these are the same screws that secure the mount to the chassis).

m2c3050 ARRMA MOTOR MOUNT
Click To Enlarge
  • Item #: m2c 3050
  * Marked fields are required.
Qty*
Price $50.00
Availability In-Stock