m2c2515 KYOSHO 16MM ZRS(ZERO REBOUND SYSTEM) SHOCK CAPS

This shock cap allows you to build an (emulsion style) zero rebound shock. coupled with the 16mm oring shock pistons we offer(9650 series pistons)

helps with handling and a more stable landing off jumps.

These caps use the mugen shock bushing.

TIP:

it is easier to remove the bushing from the old cap with the cap still on the shock.

INSTRUCTIONS:

remove bleeder screw. fill with oil to level with top of shock. screw cap onto shock.

Slowely push piston shaft up to top of stroke. Hold shaft up and put 2 mm screw in. (it is best to put screw in with a wrench and not a driver to

avoid cross threading the screw.

NOTE: It is a good idea to check the shocks and rebleed if necessary to keep from building pressure due temprature changes during the day . We have also noticed that this can happen if you have a lower shock oring that is leaking.

This vidio is made by Josh Hollifield for the Mugen but the build is the same for all ZRS shock caps.

How to set up shock caps vidio

https://www.youtube.com/watch?v=7WEViNK92kM

m2c2515 KYOSHO 16MM ZRS(ZERO REBOUND SYSTEM) SHOCK CAPS
Click To Enlarge
  • Item #: m2c 2515
  * Marked fields are required.
Qty*
Price $49.98
Availability In-Stock