m2c5360 MUGEN MBX7/7 GAS TRUGGY CHASSIS FRONT,REAR SKID PLATE

 These chassis are made using 1/8 inch(3.25mm) thick 7075 aircraft grade materials and clear anodized.

we have tested and tweeked these chassis to provide the racers a top notch chassis that will perform very well on all surfaces.

this model is made for the tracks with a high wear charastics such as we have in western states , up north and canada . as well

as softer track condidtions.

this model will give you a much longer chassis life than  other models as you can replace the steel skid plates and be back to a new

chassis thickness.

The only difference between the 7 and 7r chassis is a little added kick up in the side bends.

Due to the material we use we cannot get the 15 degree angle. To compensate for this We shallowed up the cutouts in the chassis

to give the same feel.

It is important to note that these skid plates fit flush to the bottom of the chassis and will not effect the droop settings and cause you to

scrub speed on the landings.

FEATURES:

hardened droop screw stops to prevent chassis wear and droop changes.

A longer tapered  milled out area for the clutchbell to help prevent clutchbells from hitting the chassis during chassis flex.

milled out area for gas tank screws to help keep tanks from cracking.

hardened steel rear skid plate

weight 340 grams

Replacement skid plates

5307 front (both skid plates)

5308 rear plate

 

m2c5360 MUGEN MBX7/7 GAS TRUGGY  CHASSIS FRONT,REAR  SKID PLATE
Click To Enlarge
  • Item #: m2c 5360
  * Marked fields are required.
Qty*
Price $114.95
Availability In-Stock