m2c6101 GEN 2 34MM (4) HARD QUICK CHANGE VAR. WT. KIT

WELCOME to GENERATION 2  OF M2C RACING"S  FLYWHEELSKITS. THIS MODEL HAS A LARGER(,3 MM FLYWHEEL PIN AT THE BOTTOM OF THE SHOE WHICH WILL GIVE MUCH LONGER LIFE TO THE FLYWHEEL PINS.

 THE LIGHTEST TO THE HEAVIEST FLYWHEEL iN ALUMINUM ON THE MARKET BY SIMPLY ADDING THE WEIGHTS TO HELP CONTROL WHEEL SPIN. THE STRONGER THE MOTOR THE MORE WEIGHTS YOU ADD THE LOOSER THE TRACK THE MORE WEIGHT YOU ADD. THE FLYWHEELS CAN BE LOADED OFF THE MOTOR. THE 8MM CLUTCH NUT WILL ALLOW YOU TO CHANGE FLYWHEELS WITHOUT REMOVING THE SHOES. THIS NEW VARIABLE WEIGHT FLYWHEEL IS DESIGNED TO FIT ALL 1/8 SCALES . THIS ALLOWS YOU TO ADD OR REMOVE WEIGHT TO FIT TRACK CONDITIONS. THIS FLYWHEEL STARTS OUT AT 19.0 GRAMS WITH NO WEIGHTS AND IS ADJUSTABLE UP TO 24.5 GRAMS WITH SHOES. THE FORMULA IS SIMPLE THE LOOSER THE TRACK THE MORE WEIGHT YOU ADD. FITS ALL 1/8 SCALE VEHICLES WITH NO MODIFICATIONS. KIT INCLUDES: (1) 4 SHOE FLYWHEEL NEW EASY ON CLUTCH NUT AND TAPERED COLLET.

This flywheel is designed so that it can be assembled on or off the car. That way u can have multipal clutches already built with different 

springs and weights and only have to change the flywheel and be ready to go in about 5 minutes.

This clutch system fits:

MUGEN, LOSI, HOT BODIES,ASSOCIATED,DURNAGO TEKNO, KYOSHO(TRUGGY) KYOSHO BUGGY(32MM M2C 6325)

WORKS WITH STOCK CLUTCH BELLS.

THIS SYSTEM COMES WITH THE FOLLOWING:

 (1) SET HARD CLUTCH SHOES (1) SET .9 SPRINGS (1) SET .95 SPRINGS (1) SET 1.0 SPRINGS (1) SET 1.05 SPRINGS (1) SPRING WRENCH (1) PK 4MMX6MM SET SCREWS (1) MOCK CRANK TOOL THAT ALLOW YOU TO CHANGE SHOES OFF THE VEHICLE WITHOUT INJURY SINCE WE HAVE ALL STUCK OURSELVES WITH A SCREWDRIVER TRYING TO CHANGE CONVENTIONAL CLUTCH SHOES. !!!!!! NOTE !!!!! TRACK CONDITIONS AND MOTOR MAY DICTATE A DIFFERENT CLUTCH SHOE

NOTE: THE DIFFERENCE BETWEEN THE GENERATION (1) 4 SHOE AND THE GENERATION (2) IS THE FLYWHEEL PIN IS 3MM AT THE BOTTOM OF

THE PIN AND 2.5MM AT THE TOP.  THIS WILL INCREASE THE LIFE OF THE PIN AND MAKE IT MORE RIGID.

GENERATION 1 CLUTCH SHOES WILL NOT WORK WITH THIS SYSTEM SO BE CAREFUL WHEN ORDERING SHOES.

 

m2c 6187 hard shoes

SPRINGS:

USES THE 9000 SERIES SPRINGS.

NOTE::::::: most spring tools will work with this system. Although not absolutely , this tool makes it much easier to change shoes.

Is also helps you avoid sticking a screw driver in your hand

 Spring wrench is included with kits

WHEN REMOVING CLUTCH SHOES, WHEN SLIDING THE SHOE UP THE POST, PUT SCREW DRIVER AS CLOSE TO POST AS POSSIBLE.

DONOT PRY ON THE END OF THE SHOE.

 

m2c6101 GEN 2 34MM (4) HARD   QUICK CHANGE VAR. WT.  KIT
Click To Enlarge
  • Item #: m2c 6101
  * Marked fields are required.
Qty*
Price $54.98
Availability In-Stock